Please take a few minutes to inspect the exterior of your computer, monitor, speakers, and any other peripherals. If you find any exterior defects such as scratches or dents, please advise the Shuttle XPC System technical staff immediately at: 1-888-XPC-1818

Before you begin to connect any peripherals such as a monitor, speakers, or joystick, it is highly recommended that you connect a power surge protector/arrester or uninterruptible power supply (UPS) via the power cord supplied. Make sure you connect the power surge protector/arrester or UPS to the nearest power outlet.

When turning on the computer for the first time, only connect the peripherals supplied to you by Shuttle XPC System. Do not connect any peripherals purchased from any other vendor until after the initial boot. After the system has powered up for the first time and you have proceeded to register your information within Windows, you may proceed to connect any other devices.

Keyboard Connection

Connect your keyboard to the port labeled "keyboard", located on the rear of the computer. Please note that both the keyboard and the keyboard port on the computer are color coded PURPLE. Align the pins and insert gently, do not force! Please note: If you have a USB Keyboard, connect it to the port labeled "USB".

Mouse Connection

Connect your mouse to the port labeled "mouse", located on the rear of the computer. Please note that both the mouse and the mouse port on the computer are color coded GREEN. Align the pins and insert gently, do not force! PLEASE NOTE: If you have a USB Mouse, connect it to the port labeled "USB".

Monitor Connection

Connect your monitor cable (15-pin male) to your MPEG-2 decoder card (if applicable) or directly to the video card if no MPEG-2 decoder is present.

Power Connection

Connect the power cord to the power supply and plug into a protected power source. Make sure your monitor's power cord is connected to a protected power source.